100% Non Asbestos Fireproof Facade Decorative Exterior Wall Panel Reinforced Fiber Cement Sheet
4. high strength
5. light weight
6. low water absorption
7. good weather resistant
8. high performance-price ratio
9. 100% free of asbestos and other hazardous substances.
1. Environmental friendly,no VOC gas when installation
2. Large effect,elegant appearance,less gap and favorable to cleaning
3. Low thermal conductivity and favorable to heat insulation and energy saving
4. Surface diffuse reflection and not reflective
5. Good durability and long service life
6. Bright apperance and rich color gives us a feeling of cleanliness and warmth
It is strong and flexible board composed of cement,refined ores,reinforced cellulose fiber as the main materials.
It’s made of autoclaved process under high temperature and pressure which generates a light-weight,durable and smooth-faced board for various applications of interior and exterior decoration.
Compressed Fiber Cement Board
Water absorption (%)
Wet expansion (%)
No delamination and crack after 25cycles under freezing and thawing
|Water penetration||No water drop on the board surface|
1. Fire-proof structure
2. Fire-proof ceiling
4. Water-proof Baffle
6. Flue board
7. Access foor
8. Cabinets etc.
(1). Thickness: 4-24mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available,such as 915mm*1830mm,1220mm*3000mm
1. Hold by Wooden Pallet
2 2. Covered by PVC and Bonded with plastic belt
3 3. Fasten around the corners
4 4. Mounted in container to protect your purchasing.
1. Galvanized Metal Frame
a.The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
b.The vertical keel should be aligned well according to the requirement (generally being 612 mm) with
laterally supporting keel installed.
2. Board Material Package Fixed
a. Cutting the board material to the dimensions needed (about 10mm lower than wall height)
b. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c. The expansion seam of about 4mm between boards should be kept.
d. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e. Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled
|Raw Material:||Fiber,Cement,Quartz Sand||Frost Resistant:||No Delamination And Crack After 25cycles Under Freezing And Thawing|
|Color:||Light Grey&Dark Grey||Surface Type:||Smooth&Wood Grain|
|Release Of Asbestos:||100% Free Asbestos||Packing:||Wooden Pallet+Wrapping Film|
|Thermal Conductivity:||0.20-0.25W/MK||Edge:||Square Edge/Beveled Edge/Tapered Edge|
|Usage:||Wall Decoration||Treament:||UV Coated|
|Radioactivity:||Conforming To GB6566-2001 A Class|